Technical systems – input, processing, output and feedback

Design & TechnologyEngineering Drawing & DesignAges 15–16

Use with my class

A real-time block diagram of a familiar technical system (water heater, air conditioner, rice cooker, or float-valve water tank): a setpoint block, a control block, the controlled object and its output, plus a feedback path that returns the measured value to the controller. Students compare the closed loop, which tracks the setpoint, with the open loop, which drifts. Two more screens split a real product (an automatic door, an electric scooter or a roller shutter) into its information chain (acquire, process, communicate) and energy chain (supply, distribute, convert, transmit), and follow one button press from the user through software layers down to the voltage on a microcontroller pin.

Lesson: Technical systems: input, processing–control and output elements, feedback; energy and information chains; layers of an embedded device

What it shows

A technical system can be drawn as blocks. On the feedback screen, a setpoint, a controller and an output act on a controlled object, and a sensor returns the measured value; with feedback the closed loop holds the setpoint, while the open loop drifts. On the chains screen, a real product is split the way the French technology curriculum does it: an information chain that acquires, processes and communicates, and an energy chain that supplies, distributes, converts and transmits. On the layers screen, one button press travels from the user through the driver and the program down to the voltage on a pin.

How to use

On Feedback loop, choose a Technical system under System settings, press Run, then Add disturbance or Turn off feedback and compare the curves. On Chains, pick a Product, drag each component onto the block that does its job and press Check. On Layers, press Press and release the button, change the Debounce time in the driver and compare the clicks in the table.

Parameters you can change

  • Technical system 20-litre water heater – 2500 W, Room air conditioner – 2500 W, Electric rice cooker – 700 W, Rooftop water tank with float valve
  • Setpoint (temperature or water level) 16–110 °C or cm
  • Feedback loop enabled (closed-loop system)
  • External disturbance level 0–100 %
  • Simulation speed 0.2–5 min/s
  • Screen Feedback loop, Energy and information chains, Layers in an embedded device
  • Product Automatic sliding door, Electric scooter, Electric roller shutter
  • Debounce time in the driver 0–3 ms

Questions to explore

  1. In the water tank with a float valve, which part acts as the sensor in the feedback loop?
  2. What happens to the water heater's temperature when feedback is turned off, and why?
  3. Why does the output of the closed-loop system oscillate around the setpoint instead of staying exactly on it?