Measuring the speed of sound – echo timing, two microphones on an oscilloscope, ultrasound in phase

PhysicsOscillations & WavesAges 16–17Virtual lab

Use with my class

A virtual practical that measures the speed of sound in air in three ways: timing an echo from a wall with a stopwatch (one echo, or clapping in time with the echo for many intervals), reading the delay between two microphones on a dual-trace oscilloscope (v = d/Δt), and moving an ultrasound receiver until the two signals are in phase again to find the wavelength (v = λf). Includes a results table, mean and standard deviation, straight-line graphs with a best-fit line, and the effect of air temperature. The Echo uses tab shows sonar finding the depth of the sea from d = vt/2 (v ≈ 1500 m/s in sea water), echolocation by bats and dolphins, and a hall with hard or soft surfaces: the reverberation time from Sabine's formula T = 0.161V/A and the least distance for a distinct echo.

Lesson: Speed of sound in air: echo method, two microphones and an oscilloscope, and v = fλ; effect of temperature; Uses of echoes: sonar, echolocation and reverberation

What it shows

Sound is a longitudinal wave that travels at about 343 m/s in air at 20 °C, about 0.6 m/s faster for each degree. This virtual practical measures it with an echo and a stopwatch (v = 2d/t), with two microphones and an oscilloscope (v = d/Δt) and with ultrasound receivers in phase (v = fλ). The Echo uses tab turns the idea around: from an echo time, d = vt/2 gives the depth of the sea under a ship or the distance from a bat to a moth. In a hall, reflections linger as reverberation, with T = 0.161V/A, and an echo is heard apart only after 0.1 s.

How to use

Choose a tab. Echo: set Distance to wall d and press Clap once or Clap N intervals. Two microphones: press Clap, move Cursor 1 and Cursor 2 to the start of each pulse, then press Record. Ultrasound phase: move R2 position x until the traces line up and press Record in-phase position. Echo uses: choose Sonar, Bat, Dolphin or Hall, press Ping, Click or Clap, and work out the distance from the echo time.

Parameters you can change

  • Method Echo and stopwatch, Two microphones and an oscilloscope, Two ultrasound receivers in phase, Uses of echoes: sonar, echolocation, reverberation
  • Air temperature θ -10–40 °C
  • Distance to the wall d (echo) 20–200 m
  • Number of clap intervals N 5–40
  • Microphone separation d 0.2–2 m
  • Oscilloscope time base 0.5 ms/div, 1 ms/div, 2 ms/div, 5 ms/div
  • Ultrasound transmitter frequency f 38–42 kHz
  • Starting position x of R2 from R1 0–120 mm
  • Echo use (Echo uses tab) Sonar (depth of the sea), Bat (echolocation in air), Dolphin (echolocation in water), Hall (reverberation)
  • Hall length L 10–40 m
  • Hall surfaces Hard (concrete, glass), Wooden panels, Curtains and carpet

Questions to explore

  1. Why does clapping 20 intervals in time with the echo give a better result than timing one echo?
  2. Why is the graph of Δt against d a straight line, and how do you get v from its gradient?
  3. How does the wavelength of the ultrasound change when the air gets warmer, if f stays the same?
  4. A sonar echo returns 0.4 s after the ping. How deep is the sea below the ship?
  5. Why does a hall with curtains and carpet have a shorter reverberation time than a bare hall?

Teaching ideas

All guides