Charges and electric fields – field vectors, potential and equipotentials
PhysicsElectric & Magnetic FieldsAges 16–17
How do you mainly use this simulation?
Use it with your class: students open it from a link or a QR code, with no account needed.
Tap a button to take a +1 nC or −1 nC charge from the supply and drag it anywhere in the play area (up to 20 charges); the grid of electric field vectors and the colour map of electric potential update around the charges. Drag the sensor to read the magnitude and direction of the electric field at a point, drag the two voltmeter probes to measure potential difference, and use the tape measure for distances. Switch on the equipotential tool and tap the play area to trace and draw a labelled equipotential line. Based on the "Charges and Fields" simulation by PhET Interactive Simulations, University of Colorado Boulder (CC BY 4.0); rewritten. On the Dipole in a uniform field tab, a dipole p = qd between two charged plates feels no net force but a torque τ = pE·sin θ that turns it to line up with E; its potential energy U = −pE·cos θ is drawn on a U–θ graph, and the torque and energy are recorded against angle and field. On the Continuous charges tab, a rod, a ring, a disc and a sheet are built from many small charges: a probe P shows each dE contribution and their vector sum, compared with the integrated formula (for example E = kQx/(x² + R²)^(3/2) on the axis of a ring) as the number of pieces grows.
Lesson: Electric fields; electric dipole in a uniform field; fields of continuous charge distributions
What it shows
A point charge sets up an electric field of strength E = kq/r² around it. The fields of several charges add as vectors (superposition), while the potential V = kq/r adds as a number, and field vectors always cross equipotentials at right angles. Between two charged plates the field is uniform. A dipole placed there feels equal and opposite forces qE on its two charges, so the net force is zero, but the couple gives a torque τ = pE·sin θ, with p = qd, that turns the dipole towards E. Its potential energy is U = −pE·cos θ. A rod, ring, disc or sheet can be cut into many small charges dq, each giving dE = k·dq/r²; their vector sum approaches the integrated formula as the pieces get smaller, and the sideways parts cancel by symmetry.
How to use
On the Charges and fields tab, tap "+1 nC" or "−1 nC" and drag the charge into place, or pick a Scenario. Turn on Field sensor or Voltmeter to measure, and press Draw Equipotential to trace lines. On the Dipole in a uniform field tab, set Field strength E, Charge q, Separation d and Angle θ, press Record to log the torque and energy, and press Release to let the field turn the dipole. On the Continuous charges tab, choose a Shape, set the Number of pieces, the size, Distance x and Charge Q (or drag the probe P), and press Record to log the summed and the formula field.
Parameters you can change
- Preset scenario Empty, One positive charge, One negative charge, Dipole (+/−), Two positive charges
- Show grid
- Show electric field vectors
- Show potential map
- Show electric field sensor
- Show voltmeter
- Show tape measure
- Screen Charges and fields, Dipole in a uniform field, Continuous charges
- Uniform field: field strength E 10–100 kV/m
- Uniform field: charge q 1–10 nC
- Uniform field: separation d 1–6 cm
- Uniform field: angle θ 0–180 °
- Uniform field: show the dipole's own field
- Continuous charges: shape Rod, Ring, Disc, Sheet
- Continuous charges: number of pieces 1–4096
- Continuous charges: size (L, R or a) 2–40 cm
- Continuous charges: distance x to the probe 0.5–30 cm
- Continuous charges: charge Q -10–10 nC
Questions to explore
- Why is the electric field vector always perpendicular to the equipotential line through the same point?
- How does the electric field of a single point charge change when you double your distance from it?
- Why does a dipole in a uniform field turn but not move along the field?