Hot and cold pack designer – enthalpy of solution and iron oxidation

ChemistryEnergetics & ThermodynamicsAges 15–16Virtual lab

Use with my class

A design challenge: pick a process (dissolving NH₄NO₃, which is endothermic; dissolving CaCl₂, which is exothermic; or oxidising iron powder as in a hand warmer), the mass of chemical, the volume of water and the insulation. The model works out the temperature from q = mcΔT with c = 4.18 J g⁻¹ K⁻¹ and heat exchange with the surroundings over time. The pack must stay in a target range long enough, inside the safety limits and the budget, and every trial goes into a table.

Lesson: Endothermic and exothermic processes – designing hot and cold packs

What it shows

Instant cold packs and hot packs use a chemical process to take in or give out heat. Dissolving ammonium nitrate is endothermic, dissolving calcium chloride is exothermic, and hand warmers release heat slowly as iron powder oxidises in air. You choose the process, the mass of chemical, the water and the insulation, then test whether the pack stays in the target range for long enough without breaking the safety limit or the budget. The model treats the contents as water (c = 4.18 J g⁻¹ K⁻¹), ignores the heat capacity of the pouch and uses illustrative heat-loss and iron reaction rates.

How to use

Choose a Mission tab and read its target. Set the Process, Mass of chemical, Volume of water and Insulation, then press Activate to start the test, or Skip to end for the result at once. Watch the graph and the time in range. Each trial goes into the table. Change one variable at a time, and predict ΔT with q = mcΔT in the task box.

Parameters you can change

  • Mission Cold pack, Hot pack, Hand warmer
  • Process Dissolving NH₄NO₃, Dissolving CaCl₂, Iron oxidation
  • Mass of chemical 5–80 g
  • Volume of water 10–250 mL
  • Insulation None, Fabric cover, Thick foam

Questions to explore

  1. Why does the cold pack get colder when you add more ammonium nitrate to the same volume of water?
  2. How does a thicker insulating cover change how long a hot pack stays in its target range?
  3. Why is iron oxidation better than dissolving calcium chloride for a three-hour hand warmer?