Slope stability and mass movement – factor of safety, rockfalls, slumps, landslides, mudflows and creep

GeographyEarth's Structure & LandformsAges 15–16Virtual lab

Use with my class

A hillslope cross-section with a 3 m layer of soil or a slab of jointed granite over bedrock. Set the slope angle, the material, the water from rainfall, the vegetation cover and how far a river has undercut the toe. The factor of safety compares the strength holding the layer (cohesion, roots and friction) with the pull of its weight down the slope, W sin θ. Below 1 the slope fails as a rockfall, slump, landslide or mudflow; above it the soil only creeps slowly. A rainstorm raises the water table until the slope fails, and drains, a retaining wall, terraces and planting raise the factor of safety.

Lesson: Mass movement: slope stability, types of mass movement and how to reduce them

What it shows

A slope stands while the strength along a possible slip surface is larger than the pull of the layer's weight down the slope. The factor of safety FS = [c + (W cos θ − u) tan φ] ÷ (W sin θ) puts this in one number: below 1 the slope fails. Steeper slopes pull harder; cohesion and roots hold; friction depends on how hard the grains press together, and water pressure in the pores reduces it. Clays slump, soaked fine soils flow, steep rock faces drop blocks, and stable soil creeps slowly. Strengths come from published tables.

How to use

Choose the Material and set Slope angle, Water from rainfall, Vegetation cover and Undercut at the toe; read FS and the forces in the box at top left, and the graph of FS against angle. Press Rain to raise the water table until the slope fails; each storm is recorded, and Record adds the current settings. Tick Drains, Retaining wall, Terraces or Plant trees to see how much each one helps.

Parameters you can change

  • Material Sand, Silt, Clay (low plasticity), Clay (high plasticity), Jointed granite
  • Slope angle 5–70 °
  • Water from rainfall (height of the water table in the layer) 0–100 %
  • Vegetation cover 0–100 %
  • Undercut at the toe 0–8 m
  • Drains
  • Retaining wall at the toe
  • Terraces
  • Plant trees

Questions to explore

  1. Why does the same slope stand in dry weather and fail after days of rain?
  2. Which measure helps most on a clay slope at 30° full of water, and why?
  3. Why does a river cutting into the foot of a slope make it fail even when the hillside itself is safe?