Mining impacts – ore grade, waste rock, tailings, acid drainage and reclamation
GeographySoils, Biosphere & EnvironmentAges 17–18Virtual lab
How do you mainly use this simulation?
Use it with your class: students open it from a link or a QR code, with no account needed.
Design a copper or gold mine: set the ore grade, the depth of the ore and open-pit or underground mining, then run it through closure and 30 years after. Ore mined, waste rock, metal, tailings, the stream pH below the mine and the reclamation cost are recorded for each choice. A leach-column test shows how pyrite makes acid and how calcite delays it, and a third screen links rocks and minerals to their products and reserves.
Lesson: Mining and its environmental impacts: ore grade, waste rock, surface and subsurface mining, tailings, acid mine drainage, reclamation and the use of mineral resources
What it shows
Metals come from ore, rock that holds enough metal to be worth mining. Copper ore with 0.6 % copper gives 6 kg of metal per tonne; the rest becomes tailings, and an open pit must also remove the waste rock around the ore. Lower grades and deeper ore mean more rock moved for each tonne of metal. Waste rock and tailings often contain pyrite, which reacts with air and water to make sulfuric acid. Unless limestone neutralises it, acid drainage carries metals into streams for decades. Covering the waste or treating the water after closure prevents this, but it costs money.
How to use
On Mine and closure, choose the Ore, Ore grade, Depth to the ore, Mining method, Host rock, Tailings storage and Closure plan, then press Run the mine. Each finished run adds a row to the table; switch the Graph to compare runs. On Acid drainage test, set the pyrite and calcite and press Leach. On Uses and reserves, choose a Raw material and press Record for the metal ores.
Parameters you can change
- Screen Mine and closure, Acid drainage test, Uses and reserves
- Ore Copper, Gold
- Copper grade 0.2–3 %
- Gold grade 0.5–10 g/t
- Depth to the ore 20–500 m
- Mining method Open pit (surface), Underground
- Host rock Granite-like (little carbonate), With limestone
- Tailings storage Slurry behind a dam, Filtered, dry stack
- Closure plan Walk away (no reclamation), Reshape, topsoil and plants, Sealed clay cover and plants, Plants and a lime treatment plant
- Pyrite in the rock 0–10 %
- Calcite in the rock 0–10 %
- Raw material Limestone, Silica sand, Clay, Gypsum, Copper ore, Iron ore, Bauxite
- Growth in demand 0–5 % a year
- Extra recycling 0–80 %
Questions to explore
- Why does mining a lower-grade ore produce more tailings and waste for each tonne of metal?
- Why can a waste rock dump keep releasing acid drainage long after the mine has closed?
- When is underground mining a better choice than an open pit, and what does it cost the miners?