Indoor air pollution – carbon monoxide, radon, VOCs, asbestos and ventilation

GeographySoils, Biosphere & EnvironmentAges 15–16Virtual lab

Use with my class

Four pollution sources in a model home: an unvented gas stove (carbon monoxide), radon from the soil through a basement crack, formaldehyde from new furniture and paint (a VOC) and asbestos pipe lagging. Change the air changes per hour and the strength of each source, read the steady-state concentrations from the box model C = C₀ + S ÷ (n·V), compare them with the WHO guidelines and the US EPA radon action level, and record a table of concentration against ventilation.

Lesson: Indoor air pollution: sources, ventilation and exposure limits

What it shows

Most people spend most of their time indoors, where some pollutants reach higher levels than outside. In a model home, an unvented gas stove gives off carbon monoxide, radon seeps up from the soil, new furniture and paint release formaldehyde, and damaged asbestos lagging sheds fibres. A well-mixed box model gives each steady concentration as the outdoor level plus the source divided by the ventilation flow. Students compare the results with WHO guidelines and the US EPA radon action level, and see why ventilation helps but fixing the source works best.

How to use

Move Air changes per hour and choose the setting of each source: Unvented gas stove, Radon from the soil, Furniture and paint, Asbestos pipe lagging. Pick a pollutant with Show on the graph to see its concentration against ventilation with the limit lines. Press Record all four to add the four concentrations to the table, and repeat at other ventilation rates.

Parameters you can change

  • Air changes per hour 0.1–5 /h
  • Unvented gas stove Off, Burning, well adjusted, Burning, poorly adjusted
  • Radon from the soil Low, Medium, High
  • Furniture and paint Older furniture, New furniture and paint
  • Asbestos pipe lagging Intact, Damaged, Being drilled or sanded
  • Show on the graph CO, Radon, VOCs, Asbestos

Questions to explore

  1. How does doubling the air changes per hour change the part of a concentration that comes from an indoor source?
  2. Why is sealing cracks and soil suction a better fix for radon than opening windows?
  3. Why should damaged asbestos lagging be handled only by trained professionals?