Flame emission and atomic absorption – line spectra and calibration

ChemistryInorganic ChemistryAges 17–18Virtual lab

Use with my class

Spray metal salt solutions into a flame and read their emission line spectra through a spectroscope to identify the metals in a mixture, even when one flame colour hides another. Then use an atomic absorption spectrometer with a hollow-cathode lamp of the analyte metal: measure standards, build a calibration line inside the working range, and find lead in waste water and sodium in a sports drink. Lines read and absorbances go into tables.

Lesson: Flame emission spectroscopy and atomic absorption spectroscopy (AAS)

What it shows

Every metal gives out light of its own wavelengths when its atoms are heated in a flame, because electrons fall back between fixed energy levels. A spectroscope spreads this light into a line spectrum, and comparing the lines with reference spectra identifies the metals in a mixture, which flame colours alone cannot do. In atomic absorption the same atoms, still in their ground state, absorb light from a lamp made of that metal. Absorbance is proportional to concentration only inside a working range, so standards, a calibration line and sometimes a dilution are needed. The line data are real; brightness and noise are modelled.

How to use

Flame emission tab: choose a Sample and tap the lines of its spectrum to record their wavelengths, then compare them with the reference spectra. Atomic absorption tab: choose the Lamp and a Solution, press Aspirate and read, and build the calibration graph from the blank and the standards. For a sample, choose a Dilution that brings its reading inside the working range before you calculate its concentration.

Parameters you can change

  • View Flame emission, Atomic absorption
  • Emission sample Lithium chloride, LiCl, Sodium chloride, NaCl, Potassium chloride, KCl, Calcium chloride, CaCl₂, Strontium chloride, SrCl₂, Barium chloride, BaCl₂, Copper(II) chloride, CuCl₂, Mixture of NaCl and KCl, Unknown X
  • AAS lamp Lead (Pb), Copper (Cu), Sodium (Na)
  • AAS solution Blank, Standard 1, Standard 2, Standard 3, Standard 4, Standard 5, Standard 6, Standard 7, Industrial waste water, Sports drink
  • Dilution ×1, ×2, ×5, ×10, ×20, ×50, ×100, ×200, ×500, ×1000

Questions to explore

  1. Why can a spectroscope find potassium in a mixture whose flame looks only yellow?
  2. Why must the AAS lamp be made of the same metal as the one being measured?
  3. Why is a sample diluted until its absorbance falls between the standards?