Extracting metals – carbon reduction, the blast furnace, electrolysis, bio-extraction, the Ellingham diagram and refining

ChemistryInorganic ChemistryAges 17–18

Use with my class

Six screens: heat CuO, PbO, ZnO, Fe₂O₃ and Al₂O₃ with carbon to see which oxides are reduced, depending on where the metal sits relative to carbon in the reactivity series; a blast furnace with the reactions zone by zone and a table of iron, limestone, slag and CO₂ amounts; a Hall–Héroult cell that extracts aluminium from alumina dissolved in cryolite, with the mass m = MIt/(nF) and the energy used; phytomining compared with bioleaching of low-grade copper ore; an Ellingham diagram (ΔG° per mol O₂ against temperature) on which you read when carbon, CO, Al or Mg can reduce the oxides of Cu, Fe, Zn, Cr, Al and Mg; and animated froth flotation, leaching, distillation, liquation, electrolytic refining, zone refining and the van Arkel method.

Lesson: Extraction of metals: reduction with carbon, the blast furnace, electrolysis of aluminium oxide, phytomining and bioleaching, Ellingham diagrams, concentration of ores and refining of metals

What it shows

How a metal is extracted depends on its reactivity. Metals below carbon in the reactivity series, such as copper, iron and zinc, are obtained by heating their oxides with carbon: the oxide is reduced and carbon is oxidised. In a blast furnace, carbon monoxide reduces iron oxide. Metals above carbon, such as aluminium, need electrolysis. An Ellingham diagram explains this with ΔG°: a reducing agent whose line lies lower can reduce the oxide. Ores are first concentrated by froth flotation or leaching, and crude metals are refined by distillation, liquation, electrolysis, zone refining or the van Arkel method.

How to use

On Carbon reduction, choose an Oxide, set Heating temperature and press Heat. On Blast furnace, choose a zone and change the ore. On Electrolysis of alumina, set the current and press Run. On Bio-extraction, press Run and compare the curves. On Ellingham diagram, choose a Metal oxide, a Reducing agent and a Temperature, press Record reading and answer the tasks. On Concentration and refining, choose a Method and press Run.

Parameters you can change

  • Screen Carbon reduction, Blast furnace, Electrolysis of alumina, Bio-extraction, Ellingham diagram, Concentration and refining
  • Metal oxide Copper(II) oxide CuO, Lead(II) oxide PbO, Zinc oxide ZnO, Iron(III) oxide Fe₂O₃, Aluminium oxide Al₂O₃
  • Heating temperature 200–1600 °C
  • Mass of oxide 1–10 g
  • Iron ore fed into the blast furnace 50–400 t/h
  • Fe₂O₃ content of the ore 50–95 %
  • Current through the electrolysis cell 50–500 kA
  • Voltage across each cell 3.8–5 V
  • Current efficiency 80–100 %
  • Alumina dissolved in cryolite
  • Copper content of the low-grade ore 0.1–2 %
  • Mass of low-grade ore 100–10000 t
  • Last step to get copper from the solution Displacement with scrap iron, Electrolysis of the solution
  • Metal oxide on the Ellingham diagram Copper(I) oxide Cu₂O, Iron(II) oxide FeO, Zinc oxide ZnO, Chromium(III) oxide Cr₂O₃, Aluminium oxide Al₂O₃, Magnesium oxide MgO
  • Reducing agent on the Ellingham diagram Carbon (forming CO), Carbon (forming CO₂), Carbon monoxide CO, Aluminium Al, Magnesium Mg
  • Temperature on the Ellingham diagram 0–2000 °C
  • Concentration or refining method Froth flotation, Leaching (bauxite), Distillation, Liquation, Electrolytic refining, Zone refining, Van Arkel method

Questions to explore

  1. Why can carbon reduce copper(II) oxide but not aluminium oxide?
  2. In the blast furnace, which substance is oxidised and which is reduced when iron(III) oxide reacts?
  3. Why does carbon monoxide reduce iron oxide in the cooler part of the blast furnace, but carbon in the hotter part?